Cisco Catalyst 2960 24 TT switch
|
Hardware |
Vendor |
Minimum |
Maximum |
Qty |
Minimum Total |
Maximum Total |
|
Cisco Catalyst 2960 24 TT switch. |
Learning With Technologies |
$7,943.00 |
$8,333.00 |
16 |
$ 127,088.00 |
$ 133,328.00 |
|
Cisco Catalyst 2620 XM Router. |
Learning With Technologies |
$8,500.00 |
$8,900.00 |
6 |
$ 51,000.00 |
$ 53,400.00 |
|
Samsung Laser Printers |
Learning With Technologies |
312 |
921 |
5 |
$ 1,560.00 |
$ 4,605.00 |
Network cables
|
Cable Type |
Cost |
|
Cat 5 |
250’ for $23.99 |
|
Cat 6 |
250’ for $32.28 |
|
Cat 7 |
250’ for $94.88 |
|
Optical Fiber |
250’ for $50.00 |
Other Accessories
|
Hardware |
Minimum |
Maximum |
Qty |
Minimum Total |
Maximum Total |
|
Lacie 2 TB 10/100/1000 Back-up Device |
659 |
659 |
2 |
$ 1,318.00 |
$ 1,318.00 |
|
APC Back UPS RS |
202 |
495 |
2 |
$ 404.00 |
$ 990.00 |
|
Netgear WG302 Managed Wireless Access Point |
331 |
331 |
20 |
$ 6,620.00 |
$ 6,620.00 |
|
Netgear GS108 Switch 8-port |
159 |
159 |
36 |
$ 5,724.00 |
$ 5,724.00 |
|
Acer Veriton S480 including 17” LCD monitors |
760 |
886 |
200 |
$ 152,000.00 |
$ 177,200.00 |
- Major Network: 100.120.0/23
- Available IP addresses in major network: 510
- Number of IP addresses needed: 450
- Available IP addresses in allocated subnets: 456
- About 94%of available major network address space is used
- About 99%of subnetted network address space is used
|
Subnet Name |
Needed Size |
Allocated Size |
Address |
Mask |
Dec Mask |
Assignable Range |
Broadcast |
|
Lab 1 |
30 |
30 |
10.100.120.128 |
/27 |
255.255.255.224 |
10.100.120.129 – 10.100.120.158 |
10.100.120.159 |
|
Lab 2 |
30 |
30 |
10.100.120.224 |
/27 |
255.255.255.224 |
10.100.120.225 – 10.100.120.254 |
10.100.120.255 |
|
Lab 3 |
30 |
30 |
10.100.121.0 |
/27 |
255.255.255.224 |
10.100.121.1 – 10.100.121.30 |
10.100.121.31 |
|
Lab 4 |
30 |
30 |
10.100.121.32 |
/27 |
255.255.255.224 |
10.100.121.33 – 10.100.121.62 |
10.100.121.63 |
|
Lab 5 |
30 |
30 |
10.100.121.64 |
/27 |
255.255.255.224 |
10.100.121.65 – 10.100.121.94 |
10.100.121.95 |
|
Lab 6 |
30 |
30 |
10.100.121.96 |
/27 |
255.255.255.224 |
10.100.121.97 – 10.100.121.126 |
10.100.121.127 |
|
Lab 7 |
30 |
30 |
10.100.121.128 |
/27 |
255.255.255.224 |
10.100.121.129 – 10.100.121.158 |
10.100.121.159 |
|
Lab 8 |
30 |
30 |
10.100.121.160 |
/27 |
255.255.255.224 |
10.100.121.161 – 10.100.121.190 |
10.100.121.191 |
|
Lab 9 |
30 |
30 |
10.100.121.192 |
/27 |
255.255.255.224 |
10.100.121.193 – 10.100.121.222 |
10.100.121.223 |
|
Lab 10 |
30 |
30 |
10.100.120.160 |
/27 |
255.255.255.224 |
10.100.120.161 – 10.100.120.190 |
10.100.120.191 |
|
Lab 11 |
30 |
30 |
10.100.120.192 |
/27 |
255.255.255.224 |
10.100.120.193 – 10.100.120.222 |
10.100.120.223 |
|
Office |
120 |
126 |
10.100.120.0 |
/25 |
255.255.255.128 |
10.100.120.1 – 10.100.120.126 |
10.100.120.127 |
IP address for the router interface
Main Campus Router
Serial 0/0 – 140.40.4.4
Distribution Router
Serial 0/0 – 140.40.4.5
Main Campus Router
Router>enable
Router#
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface Serial0/0
Router(config-if)#ip address 140.40.4.4 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#
Router 1
Router>enable
Router#
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface Serial0/0
Router(config-if)#ip address 140.40.4.5 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#
Router(config)#int f0/0.10
Router(config-subif)#encapsulation dot1Q 10
Router(config-subif)#ip add 10.100.120.129 255.255.255.224
Router(config-subif)#exit
Router(config)#int f0/0.20
Router(config-subif)#encapsulation dot1Q 20
Router(config-subif)#ip add 10.100.120.225 255.255.255.224
Router(config-subif)#exit
Router(config)#int f0/0.30
Router(config-subif)#encapsulation dot1Q 30
Router(config-subif)#ip add 10.100.121.1 255.255.255.224
Router(config-subif)#exit
Router(config)#int f0/0.40
Router(config-subif)#encapsulation dot1Q 40
Router(config-subif)#ip add 10.100.121.33 255.255.255.224
Router(config-subif)#exit
Router(config)#int f0/0.50
Router(config-subif)#encapsulation dot1Q 50
Router(config-subif)#ip add 10.100.121.65 255.255.255.224
Router(config-subif)#exit
Router(config)#int f0/0.60
Router(config-subif)#encapsulation dot1Q 60
Router(config-subif)#ip add 10.100.121.97 255.255.255.224
Router(config-subif)#exit
Router(config)#int f0/0.70
Router(config-subif)#encapsulation dot1Q 70
Router(config-subif)#ip add 10.100.121.129 255.255.255.224
Router(config-subif)#exit
Router(config)#int f0/0.80
Router(config-subif)#encapsulation dot1Q 80
Router(config-subif)#ip add 10.100.121.161 255.255.255.224
Router(config-subif)#exit
Router(config)#int f0/0.90
Router(config-subif)#encapsulation dot1Q 90
Router(config-subif)#ip add 10.100.121.193 255.255.255.224
Router(config-subif)#exit
Router(config)#int f0/0.100
Router(config-subif)#encapsulation dot1Q 100
Router(config-subif)#ip add 10.100.120.161 255.255.255.224
Router(config-subif)#exit
Router(config)#int f0/0.110
Router(config-subif)#encapsulation dot1Q 110
Router(config-subif)#ip add 10.100.120.193 255.255.255.224
Router(config-subif)#exit
Router(config)#int f0/0.120
Router(config-subif)#encapsulation dot1Q 120
Router(config-subif)#ip add 10.100.120.126 255.255.255.128
Router(config-subif)#exit
Router(config)#ip dhcp pool lab1
Router(dhcp-config)#network 10.100.120.128 255.255.255.224
Router(dhcp-config)#default-router 10.100.120.129
Router(config)#ip dhcp pool lab2
Router(dhcp-config)#network 10.100.120.224 255.255.255.224
Router(dhcp-config)#default-router 10.100.120.225
Router(config)#ip dhcp pool lab3
Router(dhcp-config)#network 10.100.121.0 255.255.255.224
Router(dhcp-config)#default-router 10.100.121.1
Router(config)#ip dhcp pool lab4
Router(dhcp-config)#network 10.100.121.32 255.255.255.224
Router(dhcp-config)#default-router 10.100.121.33
Router(config)#ip dhcp pool lab5
Router(dhcp-config)#network 10.100.121.64 255.255.255.224
Router(dhcp-config)#default-router 10.100.121.65
Router(config)#ip dhcp pool lab6
Router(dhcp-config)#network 10.100.121.96 255.255.255.224
Router(dhcp-config)#default-router 10.100.121.97
Router(config)#ip dhcp pool lab7
Router(dhcp-config)#network 10.100.121.128 255.255.255.224
Router(dhcp-config)#default-router 10.100.121.129
Router(config)#ip dhcp pool lab8
Router(dhcp-config)#network 10.100.121.160 255.255.255.224
Router(dhcp-config)#default-router 10.100.121.161
Router(config)#ip dhcp pool lab9
Router(dhcp-config)#network 10.100.121.192 255.255.255.224
Router(dhcp-config)#default-router 10.100.121.193
Router(config)#ip dhcp pool lab10
Router(dhcp-config)#network 10.100.120.160 255.255.255.224
Router(dhcp-config)#default-router 10.100.120.161
Router(config)#ip dhcp pool lab11
Router(dhcp-config)#network 10.100.120.192 255.255.255.224
Router(dhcp-config)#default-router 10.100.120.193
Router(config)#ip dhcp pool office
Router(dhcp-config)#network 10.100.120.0 255.255.255.128
Router(dhcp-config)#default-router 10.100.120.126
Router(config-subif)#exit
Switch 0 Configuration
Switch>
Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 10
Switch(config-vlan)#name lab1
Switch(config-vlan)#exit
Switch(config)#vlan 20
Switch(config-vlan)#name lab2
Switch(config-vlan)#exit
Switch(config)#vlan 30
Switch(config-vlan)#name lab3
Switch(config-vlan)#exit
Switch(config)#vlan 40
Switch(config-vlan)#name lab4
Switch(config-vlan)#exit
Switch(config)#vlan 50
Switch(config-vlan)#name lab5
Switch(config-vlan)#exit
Switch(config)#vlan 60
Switch(config-vlan)#name lab6
Switch(config-vlan)#exit
Switch(config)#vlan 70
Switch(config-vlan)#name lab7
Switch(config-vlan)#exit
Switch(config)#vlan 80
Switch(config-vlan)#name lab8
Switch(config-vlan)#exit
Switch(config)#vlan 90
Switch(config-vlan)#name lab9
Switch(config-vlan)#exit
Switch(config)#vlan 100
Switch(config-vlan)#name lab10
Switch(config-vlan)#exit
Switch(config)#vlan 110
Switch(config-vlan)#name lab11
Switch(config-vlan)#exit
Switch(config)#
LAB D536 Switch
Switch#
Switch(config)#int f0/1
Switch(config-if)#switchport mode trunk
Switch(config-if)#exit
Switch(config)#int range f0/2-24
Switch(config-if-range)#switchport mode access
Switch(config-if-range)#switchport access vlan 10
Switch(config-if-range)#exit
LAB D531 Switch
Switch#
Switch(config)#int f0/1
Switch(config-if)#switchport mode trunk
Switch(config-if)#exit
Switch(config)#int range f0/2-24
Switch(config-if-range)#switchport mode access
Switch(config-if-range)#switchport access vlan 20
Switch(config-if-range)#exit
LAB D518 Switch
Switch#
Switch(config)#int f0/1
Switch(config-if)#switchport mode trunk
Switch(config-if)#exit
Switch(config)#int range f0/2-24
Switch(config-if-range)#switchport mode access
Switch(config-if-range)#switchport access vlan 30
Switch(config-if-range)#exit
LAB D515 Switch
Switch#
Switch(config)#int f0/1
Switch(config-if)#switchport mode trunk
Switch(config-if)#exit
Switch(config)#int range f0/2-24
Switch(config-if-range)#switchport mode access
Switch(config-if-range)#switchport access vlan 40
Switch(config-if-range)#exit
LAB D517 Switch
Switch#
Switch(config)#int f0/1
Switch(config-if)#switchport mode trunk
Switch(config-if)#exit
Switch(config)#int range f0/2-24
Switch(config-if-range)#switchport mode access
Switch(config-if-range)#switchport access vlan 50
Switch(config-if-range)#exit
LAB D503 Switch
Switch#
Switch(config)#int f0/1
Switch(config-if)#switchport mode trunk
Switch(config-if)#exit
Switch(config)#int f0/2
Switch(config-if-range)#switchport mode access
Switch(config-if-range)#switchport access vlan 60
Switch(config-if-range)#exit
LAB D522 Switch
Switch#
Switch(config)#int f0/1
Switch(config-if)#switchport mode trunk
Switch(config-if)#exit
Switch(config)#int range f0/2-24
Switch(config-if-range)#switchport mode access
Switch(config-if-range)#switchport access vlan 70
Switch(config-if-range)#exit
LAB D502 Switch
Switch#
Switch(config)#int f0/1
Switch(config-if)#switchport mode trunk
Switch(config-if)#exit
Switch(config)#int range f0/2-24
Switch(config-if-range)#switchport mode access
Switch(config-if-range)#switchport access vlan 80
Switch(config-if-range)#exit
LAB D506 Switch
Switch#
Switch(config)#int f0/1
Switch(config-if)#switchport mode trunk
Switch(config-if)#exit
Switch(config)#int range f0/2-24
Switch(config-if-range)#switchport mode access
Switch(config-if-range)#switchport access vlan 90
Switch(config-if-range)#exit
LAB D501 Switch
Switch#
Switch(config)#int f0/1
Switch(config-if)#switchport mode trunk
Switch(config-if)#exit
Switch(config)#int range f0/2-24
Switch(config-if-range)#switchport mode access
Switch(config-if-range)#switchport access vlan 100
Switch(config-if-range)#exit
LAB D539 Switch
Switch#
Switch(config)#int f0/1
Switch(config-if)#switchport mode trunk
Switch(config-if)#exit
Switch(config)#int range f0/2-24
Switch(config-if-range)#switchport mode access
Switch(config-if-range)#switchport access vlan 110
Switch(config-if-range)#exit
Office_Switch
Switch#
Switch(config)#int f0/1
Switch(config-if)#switchport mode trunk
Switch(config-if)#exit
Switch(config)#int range f0/2-24
Switch(config-if-range)#switchport mode access
Switch(config-if-range)#switchport access vlan 120
Switch(config-if-range)#exit
Cardenas, A. A., Manadhata, P. K., & Rajan, S. P. (2013). Big data analytics for security. IEEE Security & Privacy, 11(6), 74-76.
Dart, E., Rotman, L., Tierney, B., Hester, M., & Zurawski, J. (2014). The science dmz: A network design pattern for data-intensive science. Scientific Programming, 22(2), 173-185.
Eskandarpour, M., Dejax, P., Miemczyk, J., & Péton, O. (2015). Sustainable supply chain network design: an optimization-oriented review. Omega, 54, 11-32.
Fogel, A., Fung, S., Pedrosa, L., Walraed-Sullivan, M., Govindan, R., Mahajan, R., & Millstein, T. D. (2015, May). A General Approach to Network Configuration Analysis. In NSDI (pp. 469-483).
Genge, B., Haller, P., & Kiss, I. (2017). Cyber-security-aware network design of industrial control systems. IEEE Systems Journal, 11(3), 1373-1384.
Khan, S., Pathan, A. S. K., & Alrajeh, N. A. (Eds.). (2016). Wireless sensor networks: Current status and future trends. CRC Press.
Order an Essay Now & Get These Features For Free:
Turnitin Report
Formatting
Title Page
Citation
Outline
