Final Project:
Consist of two ATmega 328-p processors.
One on the Arduino Board (A) and the other independent processor (B) would form the system.
A and B will be utilized as the system programmed for the other 328 processor.
1- Use the processor (B) to monitor the room temperature using LM34
2- The processor (B) will switch the 12V DC motor either ON or OFF depending upon an establish threshed.
3- The processor (B) will be utilizing one of the many interrupts could also perform “as a task of your choice” ( Very simple task) put LED
4- The Arduino Board processor (A) would serially send the temperature if Fahrenheit and Celsius.
5- The processor (A) will be utilizing one of the many interrupts could also perform “as a task of your choice” ( Very simple task) put LED