CM 3110 NAME:
Masonry Specifications
Corporate Center II
1. What items does specification section 04255 include?
2. What has to be included in the mock up panels?
3. Are you allowed to have the frog exposed?
4. What type of cement is used in the mortar?
5. What type of Lime?
6. Aggregate required for white mortar?
7. Where is joint reinforcement required?
Anchors?
8. Why are the masonry veneer anchors 2-piece?
9. What are the bond breaker strips made of?
10. Do the weep holes include tubing?
Length?
11. Where are weep holes to be provided?
12. Cleaning masonry is typical process after completed. What is the specified solution? What has to be done before applying the solution?
13. Is the mortar mix property specification or proportion specification?
14. What type of masonry mix is required for below grade and/or for masonry in contact with earth?
15. What is the IAR of clay masonry (numerical value)?
16. What is the bond pattern for concealed masonry?
17. What type of expansion joint is required beneath masonry veneer supports?
18. What are the lintels made of and where are they required?
19. What is the joint width and pattern?
20. What is the masonry veneer anchored to and what is the spacing?
21. Where is flashing required and does it have to be sealed?