Analysis:
- Watch video entitled “Module 4 – Transfomer Circuits”
- For Laboratory Application Assignment on pgs. 600-601 examine Fig. 19-47.
- Using a turns ratio of 10:1, perform all required calculations in the following sections:
- Unloaded Secondary
- RL = 100ohms
- RL = 50ohms
- RL = 25ohms
- Scan all calculations showing all work
Simulation:
- Construct the circuit in Fig. 19-47 with MultiSIM with a 10:1 transformer
- Confirm all calculations in Step 3 with measures in MultiSIM
- Capture a screenshot of measured values and paste into a Word document
- Answer all questions in the following sections in the same document:
- Unloaded Secondary
- RL = 100ohms
- RL = 50ohms
- RL = 25ohms